Advance technology, realistically priced yet simple to operate.
FootWork is the lightest pressure plate within the FootWork family, it utilises the same capacitive sensors as
its big brother to analyse plantar pressure in both dynamic and static modes.
Download Demo Software |
Download Technical Specifications
FootWork Pressure Plate
FootWork Technical Manual
| Key Display Modules for Dynamic and Static Data Capture | |
» Dynamic Pressure Time Integral
|
» Static General Observation
» Static Stabilometry Measurement » Static 3D |
Dynamic Module: Screen Shots
FootWork's dynamic module is intuitive to use and displays clear and precise
information that is simple to interpret.
|
|
Dynamic Pressure Time Integral)
Click to enlarge |
The 'bread and butter' screen for viewing dynamic plantar pressure. It displays CoP and its velocity, information vital to establish the foots timing, function and its behaviour. One of AmCube's unique features is the display of peak pressure markers, a key determinator for injury/pathology. The display is able to show Mean and Maximum pressure as well as contact time. A 'note pad' is available to record observations, while on screen tools can draw angles and measurements. |
Dynamic Force Chart)
Click to enlarge |
This screen displays Force vs Time as a graph, it provides clear and precise information of how the foot is reacting. The speed of the time-line can be adjusted or paused to analyse pressure, foot behaviour, timing and phasing, all factors that help the identification of injuries or pathology. Each data sample can be compared individually or as an average. Beneath the graphs you will see podograph pressure display that will aid identification of peak and the foots centre of pressure. |
Dynamic Video)
Click to enlarge |
This screen shows a intergrated webcam recording synchronous images of the foot walking over the mat during data capture. The combination of views allows quick intereptuion of movement, pressure and timing. Replaying the video file frame by frame showing 'real time pressure capture is ideal for client communication. The 'Study Area' enables defined areas of interest (injury/pathology) to be examined with the use of force vs time graphs. |
Dynamic 3D)
Click to enlarge |
The 3D display provides wonderful qualative information for your client. The display can be viewed statically as 'total pressure' or dynamically as a movie. It is possible to adjustment the 3D scale, defination and observation speed of the image. A simple 'dashboard' enables the image to be scrolled frame by frame providing a great insight into the foots pressure behaviour. Left and right feet can be synchronised at intial contact to highlight assymetry. |
Static Module | |
|
FootWork Pro's static analysis aids identification of elevated plantar pressure and postural sway.
Three areas of analysis are available; General, 3D and advanced Stabilometry. Capture time and frequency (up to 200hz) can
be set to suit your analysis needs. Data is clearly displayed with options for mean, maximum and total pressure values.
| |
Static General Observation)
Click to enlarge |
This view displays the distribution of plantar pressure under static observation. The centre of (overall) mass (CoM) is shown using cross-hairs, while mass distribution is calculated for each of the four quadrants as a percentage. Also highlighted is the CoP of each foot and its position relative to the CoM. Either mean or maximum pressure can be selected. Drawing tools are available to measure distance and angles on screen. |
Static Stabilometry Measurement) Click to enlarge |
‘Stabilometry' analysis: Pressure is measured over time and distance capturing anterior, posterior and lateral displacement. This creates 'pressure ellipses' showing the displacement of the CoP of each foot, and the displacement of CoM for the whole body. This will highlight poor posture, instability and asymmetry, while there shape indicates planes of movement. The data is also shown in displacement graphs with pressure and time values along the axis. Capture time and frequency (up to 200Hz) can be set to suit your analysis needs. |
Static 3D) Click to enlarge |
3D observation: The analysis data is converted into this three dimensional display to create a fantastic qualative image, it is an indispensable communication tool between you and your patients. The values can be adjusted to highlight peak pressure and the view rotated within the screen to provide you and your clients with the best prespective. Switching between mean, maximum and total pressure is simple. These views as well as you notes may be added to your reports. |
| » FootWork Pro
» FootWork » AmCube Home | |
For more information please email us: contact@mar-systems.co.uk